Advantages of choosing polyaluminum chloride water treatment

Based on the water quality, Jiarun Environmental Protection Co., Ltd. can provide targeted production according to the water quality and adhere to the concept of “full solution” to serve the market. Polyaluminum chloride flocculant has a wide application range, adapts to a wide range of water, and easily forms large silk flowers with good sedimentation performance.
High-efficiency flocculant polyaluminum chloride is mainly used for the purification of drinking water and industrial feed water, as well as the treatment of industrial wastewater. At the same time, it can also be used to remove heavy metals such as iron, manganese, chromium and lead contained in water, as well as fluoride and water containing oil, so it can be used for the treatment of various industrial wastewaters; this product has strong adaptability to treated water, especially The treatment effect of high turbidity water is more obvious. Let's take Jiarun Environmental Protection to mention the 11 advantages of polyaluminum chloride in water treatment:
(1) Under normal raw water conditions, the flocculation effect is superior to commonly used inorganic flocculants, such as aluminum sulfate, ferrous sulfate, ferric chloride, and the like.
(2) The formation of flocs is fast and the sedimentation speed is high. Therefore, the reaction and precipitation time can be shortened, and the treatment capacity can be improved by 1.5 to 3.0 times under the same conditions.
(3) The dewatering performance of the precipitated sludge is higher than that of aluminum sulfate and lower than that of aluminum trichloride.
(4) Under the equal dosage, the alkalinity of the water consumed by the polyaluminum chloride is less than the alkalinity of the water consumed by the various inorganic flocculants, and the pH of the effluent after treatment is also reduced.
(5) It is suitable for wide application range, and it is not easy to produce water quality deterioration after excessive dosage, which is beneficial to operation management and improvement of water purification safety.
(6) The suitable raw water pH range is wider than aluminum sulfate, and the adaptability to raw water temperature is stronger than that of aluminum sulfate.
(7) The turbidity, alkalinity, and organic matter content are highly adaptable.
(8) The increase of salt in the treated water is small, so the polyaluminium chloride is favorable for the pretreatment of the pharmaceutical industry, light industry and pure water.
(9) The treatment water cost is lower than the existing various inorganic flocculants.
(10) The active ingredient (solid) is 2.5 to 3.0 times that of aluminum sulfate. The dosage is small, which is beneficial to transportation and storage, and can reduce the labor intensity of the drug delivery system. (11) It is less corrosive to the administration system and the operator's skin and clothing, and improves labor intensity.

It can be seen that the water purifying agent polyaluminum chloride is really a good choice. If there is more industry knowledge to consult, Jiarun Environmental will try its best to answer your questions.
Http:// Submission:


Stainless steel is a corrosion resistant steel alloy with a minimum of 10% chromium. There are different grades and surface finishes of stainless steel produced to accommodate the environment in which the material will be implemented. Unlike carbon steel, stainless steel does not rust when exposed to air and moisture due to the sufficient amount of chromium present. The chromium creates an invisible passive film of chromium oxide that will not let oxygen attack the surface and prevents rusting of the iron base.

Yuhong Group is a stainless steel manufactory of more than 20 grades of Stainless Steel.

Stainless Steel Flange

Stainless Steel Flange,Stainless Steel Pipe Flange,Din Forged Stainless Steel Flange